Project Address:
115 N 1000 W, BLDG. 01
Salt Lake City, UT 84116
PROJECT DESCRIPTION
The Project consists of alterations to the existing two-level, approximately 4,500-square-foot Administration Building at the Utah State Fairpark. Work includes removal of existing floor coverings and wall base; installation of new carpet tile, walk-off carpet tile, broadloom stair carpet, luxury vinyl plank flooring, and rubber wall base; repair, re-fastening, and preparation of the existing second-level plywood subfloor to receive new flooring; preparation, patching, and painting of existing interior walls, ceilings, wood trim, doors and frames, paneling, exposed ductwork, and related surfaces; preparation and painting of the exterior balcony railing, fascia, and wood supports; application of a resinous coating to the existing exterior concrete patio; replacement of exterior dimensional letter signage; and replacement of two lavatories and two water closets. The building will remain occupied throughout construction.
Additional work includes two unit-price items for localized second-level subfloor replacement and plywood underlayment, and two additive alternates for manual roller shades and complete second-level subfloor replacement.
UNIT PRICING
Unit Price No. 01 – Plywood Subfloor Replacement
Description: Remove and replace localized areas of existing second-level plywood subfloor determined by the Architect to be damaged or otherwise unsuitable to remain. Provide new 3/4-inch tongue-and-groove APA-rated plywood subfloor, matching existing thickness where existing conditions differ. Include removal and disposal of existing subfloor, fastening, and preparation of new subfloor to receive new flooring.
Unit of Measurement: Per square foot.
Unit Price No. 02 – Plywood Underlayment
Description: Furnish and install new 1/4-inch APA-rated plywood underlayment over existing second-level plywood subfloor determined to be suitable to remain but that fails the flooring manufacturer's required bond test. Include fastening, joint treatment, and preparation to receive new flooring.
Unit of Measurement: Per square foot.
ADDITIVE ALTERNATES
Additive Alternate No. 01 – Manual Roller Shades
Base Bid: Existing window blinds to remain in place. Protect existing blinds and windows from damage during construction. Refer to Sheet AE-101.
Alternate: Remove and dispose of existing window blinds. Furnish and install new manual roller shades at the windows indicated on Sheet AE-101. Field verify window dimensions prior to fabrication and installation. Provide work as specified in Section 122400 – Window Shades and as detailed on Detail A2/AE-601.
Additive Alternate No. 02 – Complete Second-Level Plywood Subfloor Replacement
Base Bid: Retain the existing second-level plywood subfloor. Remove existing floor coverings; inspect, repair, re-fasten, and prepare the existing subfloor to receive new flooring.
Alternate: In lieu of retaining and repairing the existing second-level plywood subfloor, remove and replace the entire existing second-level plywood subfloor with new 3/4-inch tongue-and-groove APA-rated plywood subfloor, matching existing thickness where existing conditions differ. Include removal and disposal of existing subfloor, fastening, and preparation to receive new flooring, as specified in Section 061000 – Rough Carpentry. If this Alternate is accepted, Unit Prices No. 01 and No. 02 shall not apply to the second level.
The trades involved in this project are demolition, rough carpentry (Subfloor Alt #2 & Unit Pricing), finish carpentry, thermal insulation, joint sealants, drywall, flooring, carpet, resilient flooring, fluid applied flooring, dimensional letter signage, manual window shades (Alt #1), plumbing
Bids are due to us Thursday, November 12th by 2PM
